I was in New York City over the weekend where I spoke at the Annual Meeting of the Northeast Sustainable Energy Association. That meeting on Saturday night was OK, but what was really great was an opportunity to explore a new infill housing project in Brooklyn that’s being built to Passive House standards and may well achieve net-zero-energy performance.

Passive House is a certification system that originated in Germany and has been picking up steam over the past few years in North America. To achieve certification, buildings must have modeled energy performance that does not exceed a very stringent limit for heating and cooling as well as total annual primary energy consumption below a specified threshold.

A glimpse into New York’s

Passive House community

It was actually through my daughter that I got to know builder Ray Sage, of Race Age, Inc., and architect Paul Castrucci, of Castrucci Architect. In addition to building high-performance buildings, Ray manages some rooftop beehives in East Village from which he harvests honey; my daughter was writing an article about raising bees in the City for her CSA (community supported agriculture) newsletter and spent an afternoon with Ray, his wife Wendy Brawer (who runs EcoCultural.info, a non-profit organization that produces GreenMaps of cities around the world, highlighting green features), and their friend Paul, to learn about beekeeping and help out with honey extraction.


Advertisement

Somehow the topic of green building came up, and it turned out that Ray and Paul were both familiar with my work with Environmental Building News. Ray and Wendy came to the Saturday evening meeting, and I was invited to visit Residence R-951, their three-unit Passive House condominium project under construction in the Prospect Heights neighborhood of Brooklyn.

Along with working together on honey extraction, Paul, Ray, and Wendy are partners in Further, Inc., a design-build firm specializing in sustainable building and the developer of R-951.

A four-story, three-unit walk-up

Being built on a narrow lot in a neighborhood of three- or four-story row houses, R-951 (named for the address, 951 Pacific Street). The three-unit row house is tall and narrow, but with a remarkable amount of outdoor space. The first-story apartment includes a sizable backyard along with half of the basement space (the rest being common space for the three units). The second-story apartment includes a small front balcony and larger rear balcony plus an upper-level loft bedroom. The upper unit is also on two levels and includes front and rear rooftop terraces along with a small front balcony.

Each unit is about 1,500 square feet. Because the project is designated as a green building by the City, there was a 500-square-foot bonus provided to the developed area. "That is huge," Paul told me, in that it allowed the addition of the terrace space.

The building is insulated with insulated concrete forms (ICFs) and lots of additional polyisocyanurate foam insulation. Windows are state-of-the-art triple-glazed Schüco units from Germany with NFRC U-factors of 0.15 and remarkable 0.71 visible transmittance. In other words, these windows allow less than half as much heat loss as standard, American double-glazed windows with low-emissivity glass and argon gas fill), yet they are just as clear or even clearer. The solar heat-gain coefficient (SHGC) is 0.50 -- allowing plenty of solar gain for passive solar heating benefits.

Indoor air quality will be ensured with the highest-efficiency heat-recovery ventilators on the market -- those made by the Swiss company Zehnder (the same product we’ve installing in our house). As with our house, the small-diameter round ducts are snaking through R-951 by the dozens.

Net-zero-energy

The building is all-electric. A Mitsubishi mini-split air-source heat pump provides heating and cooling for each apartment. Hot water will be provided with Stiebel Eltron heat-pump water heaters, which I believe are the highest efficiency heat pump water heaters on the market. Induction cooktops and electric ovens will be used in the kitchens.

A rooftop solar array will provide a total of 12.2 kilowatts (kW) of solar electricity (4.2 kW for one unit and 4.0 kW for each of the other two). These will be net-metered systems that "spin the meter backwards" when the system is producing more electricity than the apartment is using. The solar system is being installed by AEON Solar and will tie into the Con Edison power grid.

The solar system will not include battery back-up, but will use SMA’s new transformerless inverters with access to some power when the utility grid is down and the sun is shining. I wrote about this new inverter last month, and love the resilience benefits it provides.

The solar system will come close to making the project net-zero-energy, but whether it actually gets there will depend on how efficiently the homeowners operate their apartments.

The cost for all these added features to achieve Passive House performance is about 5 percent, according to Ray, and they anticipate that these features may boost the selling prices slightly compared with standard condos in the neighborhood -- one of which is going up next door (with a common wall) and offers a clear comparison.

Burgeoning interest in

Passive House

After our visit to R-951, Ray, Wendy, and I drove through a few neighborhoods of Brooklyn looking at a number of other projects that are currently being built or renovated to achieve Passive House certification -- and one being built to the Passive House performance standards, but that will not be certified (because the owner wanted a fireplace). And these projects were all within a few blocks on R-951.

I was amazed to learn of so much activity. In fact, Wendy told me that there are over 700 members of the NY Passive House MeetUp Group! That doesn’t mean that all those people are actually building Passive House projects, but clearly there is a great deal of interest.

Alex Wilson is the founder of BuildingGreen, Inc. and the Resilient Design Institute (www.resilientdesign.org), both based in Brattleboro. Send comments or suggestions for future columns to alex@buildinggreen.com.