Tuesday October 9, 2012

When China dives into a technology, it does so in a big way. Nowhere is this more the case than in photovoltaic panel manufacturing, where dramatic growth has not only taken a toll on other manufacturers around the world, but also now threatens its own PV industry through rampant oversupply.

This has significant implications for us here in the U.S. -- both good and bad.

What happened?

China learned how to manufacturer PV modules from leading-edge manufacturers in the U.S., Germany, and elsewhere, then figured out how to do it better and much cheaper than anyone else. In just a few years China came to dominate world PV manufacturing, leaving a trail of bankrupt Western manufacturers in its wake.

According to an in-depth article in last week’s New York Times, based on data from GTM Media, world PV manufacturing capacity in 2007 totaled about 5 gigawatts, or 5,000 megawatts. Of this, roughly 2 GW of capacity was in China. This year (2012), world PV capacity has grown to over 70 GW, and China’s share of that is about 50 GW. Just since 2009, Chinese manufacturing capacity has increased six-fold, from about 8 GW that year.

The problem is that demand for PV hasn’t been growing as quickly. World demand, which has been steadily rising, is now slightly over 30 GW, is less than half the manufacturing capacity.

This glut of PV modules has resulted in plummeting prices. This has hurt not only manufacturers in the U.


Advertisement

S. and the rest of the world that haven’t been able to match China’s manufacturing efficiencies, but also Chinese companies that are losing, according to the New York Times, as much as $1 for every $3 in sales.

Good for today’s buyers

Lower prices are great for those of us wanting to install PV systems at our homes or businesses. I’ve seen promotions recently for panels as cheap as $0.68 per watt. This is despite tariffs the U.S. put on Chinese modules earlier this year for dumping (selling at below cost) that amount to about 35 percent.

PV modules represent a big chunk of the total system cost, but the other components are also significant. Most systems include an inverter, grid-intertie equipment to safely connect to the utility grid, controls, and a mounting system. These "balance of systems" components have also dropped in price in recent years, but not as quickly as the PV modules.

Locally, installers are putting in complete grid-connected PV systems in the Brattleboro area for as little as $3.40 per watt (for a 5 kW system, according to David Worth at Perkins Home Center in West Chesterfield, N.H.). Three years ago, that wouldn’t cover the modules. In 2004, the average installed system cost in Vermont was about $11 per watt -- more than three times today’s lowest cost. (The statewide average is skewed by high-cost systems with batteries for stand-alone applications.)

But the bottom line is that you have never been able to put in a PV system more affordably -- even as state incentives have dropped. There remains a 30-percent federal tax credit, but the state incentive in Vermont has dropped, and the pot of money from which that incentive is paid gets depleted quickly each time its funding is renewed.

But not necessarily good for the health of the industry

The shrinking diversity of PV manufacturers may be a bad thing for the long-term health of the solar industry. Fewer companies and less geographic spread to those companies means that we’re at the whim of policies that we have no control over. Chinese companies have racked up huge debt. According to the New York Times article, state-owned banks in China are carrying $18 billion in loans to PV manufacturers, while municipal and provincial governments have often provided loan guarantees.

Policymakers in China are apparently debating how to let PV manufacturers fail and how to choose which ones to keep afloat. In June of this year, GTM Research predicted that 21 GW of solar manufacturing capacity would come offline by 2015, due to this oversupply problem -- as a result of company bankruptcies. If all of the companies were allowed to fail, we could quickly return to a seller’s market and prices could go back up.

The glut in Chinese PV manufacturing is also bad for Obama. The much-publicized bankruptcy of Solyndra Corporation, which had received significant federal support, was largely the result of lower-cost modules being available from China. (If anyone had asked me, I would have argued against supporting Solyndra, as I thought at the time the technology was gimmicky and unlikely to compete in the long term.) Solyndra wasn’t the only solar manufacturer to fail, and others will follow suit in the months and years ahead.

I’m hoping that enough of the world’s major solar manufacturers will remain in business with competitive enough prices to keep the cost of PV systems affordable to those of us wanting to install them. We are making huge progress at adding significant solar capacity in the U.S., and I’m hoping to see that continue.

Alex Wilson is the founder of BuildingGreen, Inc. and the Resilient Design Institute (www.resilientdesign.org), both based in Brattleboro. Send comments or suggestions for future columns to alex@buildinggreen.com.