In my role with Environmental Building News and our GreenSpec Product Database, I get plenty of opportunity to research and write about innovative building products. That’s one of the really fun aspects of my job.
On occasion I also get an opportunity to try out new or little-known materials. In the construction of our new home in Dummerston -- actually the rebuilding of a 200-year-old Cape -- I’ve had the opportunity to get some real experience with lots of products. One of these is a cellular glass insulation material known as Foamglas.
Why we need a product
I’ve written often about the problems with extruded polystyrene from an environmental and health perspective. Relative to performance, extruded polystyrene (XPS) is a great product. It is water-resistant so can be used below-grade; it has high compressive strength so can be used beneath a concrete slab floor; it insulates very well (R-5 per inch); and it’s inexpensive. These properties make XPS the nearly universal choice for sub-slab and exterior foundation insulation today.
But along with these benefits are some significant downsides. All XPS today (as well as expanded polystyrenem, EPS) is made with the brominated flame retardant HBCD that has recently been added to the Stockholm list of persistent organic pollutants (POPs) and is being banned in much of the world. HBCD provides some level of fire protection, though some studies show that its benefits are greatly exaggerated -- and that protection, if real, is irrelevant below grade.
In addition, XPS is currently made with the blowing agent HFC-134a, which is a potent greenhouse gas that contributes to global warming. And some of the petrochemical-derived raw materials, including benzene and styrene monomer, are carcinogenic.
From a performance standpoint, XPS -- like most other foam plastic insulation materials -- is readily tunneled through by subterranean termites, carpenter ants, and other wood-boring insects.
Foamglas to the rescue
Foamglas is a cellular glass, rigid boardstock insulation material. It has high compressive strength, excellent moisture resistance, and tremendous fire resistance without the use of flame retardants. It is reasonably well-insulating at R-3.4 per inch (which is not as good at XPS), and it’s made without environmentally damaging blowing agents. It is also about the only insulation material that is totally impervious to wood-boring insects -- a useful property for below-grade applications -- particularly in a warming planet with termites extending their ranges north.
Foamglas has actually been around a long time -- since Pittsburgh Corning introduced it in the 1930s -- but it is used primarily for high-temperature industrial applications, such as insulating steam pipes and furnaces. It’s use as an insulation material for buildings remains very uncommon, though this use is increasing in Europe.
Even though Foamglas is a lot more expensive than XPS and its per-inch insulating value is lower, the environmental and health benefits made me want to try it out on our own home.
Our use of Foamglas
We installed four inches of Foamglas under the basement floor slab and six inches on the exterior of the foundation walls. Our designer/builder, Eli Gould, and his six-person crew not only did admirably with this little-known material, but he came up with what I believe is a great option for adhering Foamglas to a foundation wall.
We were debating whether to use Pittsburgh Corning’s recommended solvent-based adhesive ("tar") or its acrylic formula (a greener, water-based tar), which apparently doesn’t have quite as good performance properties as the solvent-based option. But the recommended solvent-based formulation sounded quite hazardous (it’s a two-component adhesive with one component consisting of three different types of diisocyanate and the other component consisting of petroleum asphalt, coal bitumen, naphthenic distillate, and hydrocarbon solvents). In either case it didn’t seem like this great product -- Foamglas -- should be part of a system held together by tar.
Eli tested different engineered cement products, as modern polymers really have dramatically changed the adhesive capabilities of cement in the last couple decades. They are also free of VOCs and sounded far safer from a health and environmental standpoint.
We settled on a polymer cement product made by Ardex used for adhering stone veneer onto masonry walls, and it worked beautifully. The two companies (Ardex and Pittsburgh Corning) were so intrigued by our field-testing that they have begun working together to test and develop this alternative adhesive system. Ardex also supplies a waterproofing coating that we applied over the Foamglas on the foundation walls: Ardicoat. We used this in place of conventional asphalt-based (tar) coating, and I feel really good about not having hydrocarbons from the coating seeping into the groundwater or being released as VOCs.
Innovation and performance
Our foundation ends up with a respectable R-12 under the basement slab and R-22 on the exterior of the foundation walls. That’s not up to Passive House standards, but it should be good enough to enable us to achieve net-zero-energy performance with a PV system supplying power for an air-source heat pump. And it should last literally hundreds of years -- a lifespan we should be aiming for.
We spent more for the Foamglas foundation insulation than we would have with XPS, but it feels good to have put my money where my mouth is relative to spurring product innovation and demonstrating greener building material options. Eli and I hope that by leading this sort of collaboration we will be able to help drive down the costs while broadening the market for Foamglas and other innovative products. With Foamglas and other inorganic products like this that may come along, we hope to see more durable, insect-resistant foundation systems that can help reduce energy consumption while minimizing health and environmental impacts.
Foundations are not the only part of the building in which Eli and I plan to help companies "connect the dots" in developing better buildings. We’re working on innovative window solutions for existing homes, superinsulated roof systems, and modular components to speed construction -- but those are topics for future columns. Who knows, maybe we can even convince some leading manufacturers to move to the Brattleboro area and help to spur economic development in the region.
Alex Wilson is the founder of BuildingGreen, Inc. and the Resilient Design Institute (www.resilientdesign.org), both based in Brattleboro. Send comments or suggestions for future columns to firstname.lastname@example.org.